If you lik this type of ventilation, you ne to find out how exactly it will be done. We have consider some features of the system. Now let’s look at the instructions for its creation. To implement everything in life, you will ne the following tools:
- if there are no holes, a hammer drill is ne;
- grinder, which will be us to cut the pipes;
- sewer pipes of the appropriate diameter or other plastic pipes;
- protective grille, umbrella and shutter;
- silicone sealant;
- tape measure, marker and level.
With this kit, natural ventilation of the garage
with your own hands will be done in the botim data possible time. So, let’s look at the instructions for creating to make your garage safe and comfortable.
- First, you ne to calculate the recommend the russian-language neural network logo generator of the ventilation pipe holes. The instructions on how to do this were given above. If step by step, then first measure the area of the garage, then multiply the sum by 1.5 and divide by two. You can simply multiply the area by 0.75.
- Pipes of the appropriate diameter are purchas in the store.
- Holes are made in the walls for these pipes, they must be identical to the diameter of the products. A hammer drill is ne for this work. First of all, a hole is made in the wall for the supply pipe. The recommend distance is 10-15 cm from the floor.
- When the first hole is ready, you can start forming the second one. It is made on the opposite side. It can be form in the wall and the pipe italy numbers be brought out through the elbow above the roof, or a hole can be made in the ceiling and the pipe can be brought out at a distance of 0.5 m from the roofing material. There is a certain pattern here – the higher the pipe is, the more intensive the ventilation inside the garage.
- Now you can install the pipes in the appropriate places. The gaps between the wall and the pipe should be seal with sealants. To prevent rodents and precipitation from getting inside, the openings are protect from the outside with gratings. The same applies to the protective canopy on the exhaust pipe.
Please note! Thanks to the presence of the plug,
The owner can regulate the amount of incoming air as ne. This is especially true in adverse weather conditions.
All that remains is to check the functioning of the ventilation system in the garage of a natural type. You have made sure that its creation does not require much time, money and effort. The garage will be fresh and safe.
Conclusion
Having ventilation in the garage is not a wish, but a requirement. And it’s not just about caring for your car, but also about your own safety. We’ve look at why ventilation is ne in the garage. All the arguments are logical and clear. The simplest type of ventilation is natural ventilation. This is the easiest way to ventilate the garage, providing comfortable conditions inside. Working with fresh air is much more pleasant. Therefore, you should not delay this work, gather all your strength, buy materials and do the work yourself. Especially since there are instructions on how to do it.
How to properly install ventilation in a garage?
If the air in the garage is poorly ventilat, then the condensation constantly forming on the car units will inevitably lead to their breakdown. And the increas humidity does not have a positive effect on the interior upholstery. Therefore, you should do the ventilation in the garage with your own hands as thoughtfully and correctly as possible. There should be as little moisture inside as possible, and the exhaust gases should go outside as quickly as possible.
Garage Ventilation Schemes
In most cases, a private garage is a small room for one car. Plus, part of the space in it is often given over to a workbench with tools and a place for storing tires, canisters, etc.
It is very easy to make ventilation in such a building yourself. There is no ne to make complex calculations on air exchange here. It is enough to know a couple of formulas and standards.
There are two schemes for organizing garage ventilation:
- With natural air exchange.
- With forc air circulation between the street and the room.
The implementation of both options involves the installation of two ventilation vents with pipes – one for exhaust, the second for inflow. The forc ventilation system requires an electric fan. But for most garages, a conventional system with natural air draft will be more than enough. It is energy independent, extremely easy to install and cheap.
Air circulation in a garage with a pit with natural ventilation
It is worth installing flow or exhaust ventilation in the garage that requires electricity only if it has heating. In this case, it is best to leave your choice on one exhaust. With its help, you can organize quite an effective air exchange. And it will not cost as much as combin supply and exhaust ventilation. The latter consists of a considerable amount of expensive equipment, which also requires additional costs during operation.
When choosing a garage ventilation scheme, it is also necessary to take into account the design features of the garage box. If it is in a row of similar structures, then there are restrictions on making ventilation holes in some of its walls. Ventilation pipes will not be able to be brought out from all sides of the building. But to increase natural draft, they should be locat in the garage at its different ends.
In this case, it is recommend to opt for an exhaust, supply or combin option. These types of ventilation in the garage do not depend so much on the location and size of the air ducts. The fan power will be more important here.