So, we have consider how to properly make ventilation in the garage. Each of the present options has its pros and cons. The choice in favor of one of them should be made bas on the budget. The best option in terms of price and quality is a combin scheme.
As it became known from this article,
ventilation in the garage with your own hands is necessary for every car owner, and it is also not at all difficult. Do not forget that thanks to it, the “iron horse” will last longer, and there business owner data be less health hazard for the garage owner when visiting this room.
How to make natural ventilation in the garage. If there are ways to protect valuable property in the garage behind strong walls and gates, but there is such an enemy that is invisible, and can bring even more problems.
Answer one question honestly
How often have you smell mold and adam seede director, contact centers / customer support in your garage? Few people know, but high humidity can seriously harm not only your health, but also your car.
Creating conditions for natural ventilation in the italy numbers is the best way out of this unpleasant situation.
Why is ventilation ne?
The 100% certainty, or rather even the delusion of many car enthusiasts that the garage does not ne ventilation, is easily refut by the following negative consequences:
- A toxic environment is creat in the garage, which can negatively affect your health. If there is no ventilation system in the garage, then the atmosphere inside will cause lethargy, migraines, and in some cases even intoxication. Even you will think that none of this is there, which means that the concentration of toxins is not high, but over time the indicator will increase and mak itself known.
- Dampness has a destructive effect on car parts. It can also damage electronic equipment. In addition, excess moisture causes irreparable damage not only to the car, but also to walls, wooden supports and other structural elements (fungus often forms on them).
Even if you install the simplest natural ventilation system in your garage, you can protect yourself and your property from negative factors. By the way, according to SNiP 21-02-99, any utility building must have at least minimal communications.
Please note that regardless of the complexity of
The ventilation design, it must be in both a cold and a heat garage. Standards state that outside air must enter the room at least 185 l3/hour, while the temperature data in the extension must be at least about +6 degrees.
If you are interest, then in the European requirements you will find that the air exchange and its frequency in the garage should be no less than 7-10 times/day. We will also note that ventilation, which can provide good air exchange and blow on the car, should be install in both a one-story and a two-story building. The second case is an object with a workshop, which is usually locat on the second floor. This also includes garages that are equipp with an inspection pit. In short, all rooms in the garage must be well ventilat.
Choosing the optimal ventilation system for a garag
esign
In a garage, the ventilation system should be develop together with the initial project, since all sorts of functional openings on the walls and base should be made during construction. It is necessary to take into account the number of floors, cars that will be plac, the height of the building. You will also have to choose the most suitable option for arranging the ventilation system, and this depends on the assign functions.
There are several types of ventilation systems, we offer each of them for consideration:
- Natural ventilation. It is often us in a garage, and the basis of the system lies in the rules of aerodynamics, as well as the ability of air flows to move without coercion.
- Mechanical. For its installation, special systems are us that create an inflow and outflow of air.
- Combin. This is a successful option combining the features of the first two types, since natural air exchange works together with mechanical equipment that stimulates air movement.
In all these cases,
one or two channels can be us, and for forc movement, one hole is usually enough. To create this hole, a metal or asbestos pipe is us. The diameter of the pipes is select bas on how much air should enter. According to regulations, 1.5 cm / m2 is enough. In other words, if you want to equip ventilation in a garage with an area of 10 m2, you will ne two pieces of metal pipe with a cross-section of 150 mm. To calculate the size of the hole, you can use another formula as a basis, according to which 1/3 of the area should be equal to all the holes in the ventilation. This formula is usually us when calculating the holes that ne to be mount in a single-channel mechanical system.
Important! The cellar, which we have already discuss before, must have a separate ventilation system. Do not forget to pay due attention to the inspection pit.